The basic concept of rubber pad is EVA foam as the substrate, single-sided or double-sided coated high-performance pressure-sensitive adhesive, composite silicon or silicon material from double-die stamping from. Available in a variety of thicknesses, densities and colors, it can be cut into rolls o
Die cutting is frequently used to fabricate unique shapes from rubber, plastic and foam materials.Before starting a die cutting project it is important to discuss all specific project requirements — including whether rotary die or flatbed die cutting is the best fit for the job. Each cutting method
First, the good and bad die-cutting machine, we should look at these areas:
1, die-cutting pressure is stable process
2, whether the balance before and after the pull-down material
3, the composite material out on how well the machine, many kinds of composite materials can be used
4 Pull the material axis parallel machines with binder shaft,
5, whether the machine is running jitter-free
In line with 5:00 after, try machine Proofing above to see products made out of precision meets their requirements.
Roll slitting is a shearing operation that cuts a large roll of material into narrower rolls. There are two types of slitting: log slitting and rewind slitting. In log slitting the roll of material is treated as a whole (the 'log') and one or more slices are taken from it without an unrolling/re-reeling process. In rewind slitting the web is unwound and run through the machine, passing through knives or lasers, before being rewound on one or more shafts to form narrower rolls. The multiple narrower strips of material may be known as mults (short for multiple) or pancakes if their diameter is much more than their width. For rewind slitting the machine used is called a slitter rewinder, a slitter or a slitting machine - these names are used interchangeably for the same machines. For particularly narrow & thin products the pancakes become unstable, and then the rewind may be onto a bobbin-wound reel: the rewind bobbins are much wider than the slit width and the web oscillates across th
High Speed web Slitter use include: Suitable for medium-sized paper, printing, packaging, paper processing factory cut; the roll of paper cut into the desired width of the flat sheets. And cutting speed can reach 300m / min or more. Automatic touch-screen input data points of a machine cut.
With the vigorous development of the printing and packaging industry, people pay more and more attention to post-press processing die cutting production and the application of die cutting materials. In the Hong Kong market, all kinds of die cutting knife between launched fierce market race.