Main technical parameters of DP-1600 polyethylene, polyvinyl chloride, and polypropylene laminating and cutting machine
model | Maximum feed width | Host power | Die cutting speed | Overall dimensions | weight | Discharge diameter | winding diameter | accuracy | voltage |
| mm | w | t/m | mm | kg |
|
| mm | v |
DP-1300 | 1300 | 6KWDual motor | 80m/min | 2400*2000*1300 | 1200KG | 600mm | 450mm | ±0.1mm | 380V50HZ |
DP-1600 | 1600 | 6KWDual motor | 80m/min | 2400*2300*1300 | 1500KG | 800mm | 450mm | ±0.1mm | 380V50HZ
|
1. Technical parameters
Machine speed: 80m/min
Raw material z large width: 1600mm
Discharge diameter: 800 mm
Film diameter: 400mm
Winding diameter: 450mm
Cutting accuracy: ± 0.1mm
Voltage: 380V 50HZ
Host power: 3kw
Total power: 10kw
Raw material z Large aperture: 3 ″
Compressed air source: (0.4-0.6) Mpa (provided by the customer)
Standard slitting finished product z small width: 25MM
Host size: 2350 * 1420 * 1400mm
Discharge size: 2350 * 880 * 780mm
Weight: 2.2T
2. Discharge device
2 sets of discharge gas expansion shafts (3 "key bar type gas expansion shaft)
Magnetic powder brake 100N (Zhejiang) 1 set
Film release magnetic powder brake 50N (Zhejiang) 1 set
2 sets of discharge tension control system (Zhejiang)
1 set of deviation correction system (Taiwan gas-liquid deviation correction)
3. Continuation fitting part
1 set of adhesive roller ¥ 135 (polyurethane) for lamination
1 set of adhesive roller ¥ 135 (polyurethane) for bonding
1 set of aluminum guide rollers (surface hard oxygen treatment)
1 set of adjustable pneumatic roller up and down system
Electronic counter (Zhejiang) 1 set
1 set of film release tension adjustment system
4. Slitting part
1 set of upper circular cutter shaft ¥ 65 (upper cutter ¥ 110 * 75 * 1)
1 set of lower circular cutter shaft ¥ 65 (upper cutter ¥ 90 * 65 * 10)
Manual fine adjustment locking device
5. Coiling section
2 sets of material receiving inflatable shafts (3 "key bar type inflatable shaft)
Magnetic particle clutch 50N (Zhejiang) 2 sets
2 sets of material tension control system (Zhejiang)
Main motor (Shanghai, dual motor) 1 set
Main motor frequency converter (Shenzhen)
