EPDM Rubber Gaskets die cutting machinery

This machine employs microcomputer digital controller to set cutting quantity with a variety of dies , this machine can blank stock in many shapes. Through a precise depth adjustment, the die can blank the stock stably

Thus , waste rate is reduced , the die is fixed with pressing bars for easy replacement .

Application :

blank pvc , film , mylar , copper foil , electric conduction belt and electric insulation material .

1 Electronic materials applicable to stamping foil, PET, protective film Mylar film, and so totally removed or semi-cutting, stamping of precision molding components.

2 Launched board fuel tanks used launched, and out of the buffer zone. A protective film infrared control system uses PLC + man-machine control, two people can operate, use

Reclaimer and leak the news of time to achieve a room machinesefficiency.

3 Electronic positioning precision accuracy, precision can be controlled from the 0.01-0.03 mm. Launched precision can be controlled from the board in the 0.02-0.05 mm.

4 Steel fuselage of good and reasonable rack structure, using welded steel plate, the complete elimination of internal stress, structural precision, the body strong, uniform load,

And to maintain good accuracy, superior, reliable operation, safe.

5 Circuit integrated control system uses.

Details description of machine :
I , unwinding part ---------------max width 1300mm
1, First unwind : 3 inch air-shaft , AC Motor , frequency control
second unwind ,3 inch air-shaft , magnetic powder brake
2, unwinding effective width : 1300mm , max diameter is 24 inch ( 1000mm), bear weight at 1136KG
3, touch dancer sensor for first guiding roller
4, Servo motor control the 2 pulling roller ,
pulling roller is rubber material and hardness must at 75--80 degree , opening height is adjustable at least 24mm
II , Main Machine ------------ Die cutting area 1300*800mm
1, Four shaft hydraulic machine
2, max cutting force : 80 Ton
3, shock proof
4, with light for the die cutting part so that easy installing mould and watch the die cutting part
5, plane die cutting area 800mm length , 1300mm width
6, Safety Light Curtains at four corner .
III, electronic PLC control
1, LCD touch screen , computer control base
2, with password for data protection
3, can save the datas that setted
4, low maintainance
5, all the parts are under CE safety standard , electronic parts have CE mark
6, all the cutting / unwinding length and number are can set in the touch screen
7, cutting depth precision control at 0.025mm
8, stroke is controlled in 50--101.6mm
IV ,die cutting mould installing
with clamp tool and locking tool so that can put mould in directly and then locked , change mould in few time
V, mould plate package
1,with up and down cutting boards
2, stainless steel material mould plate , polished , easy control the cutting depth , can cutting both kiss cut and through cut
3, one piece PET or PVC sample for mould protective
4, Raiser ( tool to put conveyor belt ) for through die cutting . Conveyor belt part at main machine only.
VI, scrap/ waste Rewinding  optional 
1, three inch airshaft rewinding width AC motor control
2, max rewinding diameter is 609mm,
3, bearing weight at 222KGS
4, effective width 1300mm
5, with dancer for the tension control
VII , knock down part for the holes   optional 
1, the punching area at least 1300mmX400mm
2, Pneumatic control , and stroke at least 2 inch
3, Safety Light Curtains at four corner
4, not include the punching mould
VIII , Rewinder    optional 
1, with max roll diameter 609mm
2, Rewinding shaft is 3 inch airshaft
3, AC motor , speed can increase or descrease , with switch if forward/ reverse
4, effective width is 1300mm ,
5, max bearing weight is 1136KGS
6, Electromagnetic clutch tension control
NINE , CUTTER    optional 
1, effective width 1300mm,
2, motor control the cutter operation
3 , can move forward / backword to suit for the unwinding length per time