Main Parameters
| Item | No. | Name | unit | Parameter content | remark | ||
| Machine parameters | 1 | Feeding width | mm | 320 | |||
| 2 | Maximum die cutting area | MM | 300*300 | ||||
| 3 | Maximum operating speed | pcs/h | 12000 | Pull material length is 80mm | |||
| 4 | Clamping height | mm | 100 | Max 110MM | |||
| 5 | Mold seat stroke | mm | 60 | ||||
| 6 | Stroke adjustment | mm | 20 | ||||
| 7 | Pulling accuracy | mm | ±0.05 | ||||
| 8 | Lower template size | mm | 320*350*39.5 | Thin plate 15MM | |||
| 9 | Upper template size | mm | 320*350*27 | Pad | |||
| 10 | Lubrication method | Automatic oil circulation | |||||
| 11 | Applicable knife mold | Wood board mold, rubber sheet mold, AB mold, corrosion mold, engraving mold | |||||
| 12 | Pressure regulation method | Manual pressure regulation | |||||
| 13 | Total power | Kw | 5.5 | ||||
| 14 | Dimensions | mm | 2500*1750*1300 | ||||
| 15 | Machine net weight | Kg | 1500 | ||||
| 16 | conveyor | set | 1 | realize full cut | |||
| Electrical configuration | 1 | Main power motor | 1pcs | TECO (Taiwan) | |||
| 2 | Waste discharge motor | 1pcs | Higashimoto | ||||
| 3 | Pull material servo motor | 1pcs | Schneider (France) | ||||
| 4 | touch screen | 1pcs | Kunlun Tongtai Domestic | ||||
| 5 | Programmable Controllers | 1pcs | Mitsubishi (Japan) | ||||
| 6 | Infrared Security Sensor Device | 1pcs | Yangming (Taiwan) | ||||
| 7 | photoelectric sensor | 1pcs | Yangming (Taiwan) | ||||
| 8 | Frequency converter | 1pcs | Shilin (Taiwan) | ||||
This die cutting machine is suitable for die cut various insulating material. Like, PVC, PE, PET, tape, Mylar, Aluminum foil, Copper foil.
Die cutting speed: 170 strokes/min
Functional characteristics
The imported motor is used for the receiving ( separating ) bottom sheet of sticking film, Feeding-filming( enjoying multi-layer sticking and partial sticking) -die cutting- waste draining- slitting- rolling, all of them are completed by the computer control by one turn.
Scope applicable
Various insulating materials such as electronic shield materials, PVC, film, Mylar, cooper foil, aluminum foil, foam, etc.
Standard function
1. Unwinding machine
2, Wind attract
3, Die Cutting
4, Waste Draining
5, Cutting to sheet
6, Rewinding machine
